Tundra 4WD V8-5.7L (3UR-FE) (2007)
(d) Using SST, pinch the inside clamp.
SST 09521-24010
NOTICE: Do not overtighten SST.
(e)
Pack the outboard joint and boot with grease in the boot kit.
Standard grease capacity:
292 to 312 g (10.3 to 11.0 oz.)
(f)
Position the outside clamp onto the boot.
(g) Using SST, pinch the outside clamp.
SST 09521-24010
NOTICE: Do not overtighten SST.
(h) Using SST, adjust the clearance of the clamps.
SST 09240-00020
Standard clearance
4. TEMPORARILY INSTALL INBOARD JOINT BOOT
(a)
Temporarily install 2 new boot clamps and a boot to the outboard joint shaft.