Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1206005.png)
4. DISCONNECT REAR BRAKE FLEXIBLE HOSE
(a)
Disconnect the brake tube from the flexible hose with SST while holding the flexible hose with a wrench.
SST 09023-00101
NOTICE:
^ Do not bend or damage the brake tube.
^ Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.
(b) Remove the clip.
5. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH
(a)
Remove the 2 bolts and disconnect rear disc brake cylinder.
NOTICE:
^ Do not twist or bend the flexible hose.
^ Do not disconnect the flexible hose from the disc brake cylinder.
6. REMOVE REAR DISC LH
7. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING LH
8. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH
9. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH
10. REMOVE PARKING BRAKE SHOE LEVER SUBASSEMBLY LH
11. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
12. DISCONNECT REAR SPEED SENSOR LH
