Tundra 4WD V8-5.7L (3UR-FE) (2007)
13. REMOVE REAR AXLE SHAFT
(a)
Remove the 4 nuts and rear axle shaft together with the parking brake plate.
(b) Remove the O-ring.
14. REMOVE REAR AXLE SHAFT OIL SEAL
(a)
Using SST, tap out the oil seal.
SST 09308-00010
NOTICE: Be careful not to damage the axle housing hole.
DISASSEMBLY
1. REMOVE REAR AXLE SHAFT SNAP RING
(a)
Using a snap ring expander, remove the snap ring.
2. REMOVE REAR AXLE SHAFT
(a)
Using SST and a press, press out the rear axle shaft.