Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1216003.png)
5.
Remove the front axle hub nut LH.
A.
Remove the cotter pin and adjusting lock cap.
B.
Using the NEW SST, remove the front axle hub nut.
^
SST P/N 00002-00039
Toyota Workshop Service and Repair Manuals
Drive/Propeller Shafts, Bearings and Joints >
< Drivetrain - Front Axle Hub Nut Removal|Page 6118
Page 3
