Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1242004.png)
2007 or 2008 Tundra: Drivetrain - Transfer/4wd/Awd - "JF1A Transfer: Transfer Assembly: Reassembly"
NOTE
Start at the "Install Transfer Shift Actuator Assembly" step and complete all remaining steps through the end of the Reassembly procedure.
7.
Install the transfer case assembly into the vehicle.
Refer to TIS 2007 or 2008 model year Tundra Repair Manual:
2007 or 2008 Tundra: Drivetrain - Transfer/4wd/Awd - "JF1A Transfer: Transfer Assembly: Installation"
8.
Test drive the vehicle and confirm proper operation of the 4WD system.
