Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1272002.png)
2. ADD TRANSFER OIL
(a)
Install a new gasket and the drain plug.
Torque: 37 Nm (377 kgf-cm, 27 ft. lbs.)
(b) Pour oil so that the oil level is between 0 to 5.0 mm (0 to 0.197 inch) from the bottom lip of the filler plug hole.
NOTICE:
-
Pour oil slowly.
-
Pour oil a little at a time, waiting several minutes between each addition of oil.
(c)
Wait approximately 5 minutes and check that the oil level has not changed.
(d) Install a new gasket and the filler plug.
Torque: 37 Nm (377 kgf-cm, 27 ft. lbs.)
(e)
Install the lower transfer case protector with the 4 bolts.
Torque: 18 Nm (184 kgf-cm, 13 ft. lbs.)
