Tundra 4WD V8-5.7L (3UR-FE) (2007)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: Some systems need to be initialized after the cable is reconnected.
2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a)
Remove the nut and disconnect the cable.
3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Disconnect the switch connector.
(b) Remove the nut, spring washer and transmission control shaft lever RH.
(c)
Using a screwdriver, bend the tabs of the lock washer.
(d) Remove the lock nut and lock washer.