Tundra 4WD V8-5.7L (3UR-FE) (2007)
f.
Using suction cups, remove the back window glass.
NOTICE: If the stopper is damaged, the back window glass assembly must be replaced. Be careful when performing the procedure.
27. REMOVE UPPER OUTSIDE BACK WINDOW MOULDING (for Slide Type)
HINT: Perform the following procedure if replacing the back window moulding.
a. Using a moulding remover, detach the 3 clips and remove the back window moulding.
28. REMOVE LOWER OUTSIDE BACK WINDOW MOULDING (for Slide Type)
HINT: Perform the following procedure if replacing the back window moulding.
a. Using a moulding remover, detach the 3 clips and remove the back window moulding.
29. CLEAN BACK WINDOW ASSEMBLY
a. Using a scraper, remove the damaged spacers and adhesive sticking to the glass.
b. Clean the outer edge of the back window with a non-residue solvent.