Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-2300002.png)
1. REMOVE WINDSHIELD WASHER JAR ASSEMBLY
a. Disconnect the connector.
b. Remove the clip and 3 bolts. Then remove the washer jar.
2. DRAIN WASHER FLUID
a. Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.
3. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
a. Pull out the washer motor and pump from the packing of the washer jar to remove it.
INSTALLATION
1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
a. Install the windshield washer motor and pump to the packing of the washer jar.
