Tundra Access Cab LTD 2WD V8-4.7L (2UZ-FE) (2000)
/Page-1128006.png)
6. REMOVE RACK GUIDE SPRING CAP LOCK NUT
Using SST, remove the lock nut.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
7. REMOVE RACK GUIDE SPRING CAP, RACK GUIDE SPRING AND RACK GUIDE
a. Using a hexagon wrench, remove the rack guide spring cap.
b. Remove the rack guide spring and rack guide.
8. REMOVE RACK HOUSING CAP
Using SST, remove the rack housing cap.
SST 09816-30010
9. REMOVE SELF-SOCKING NUT
Using SST to stop the control valve shaft rotating, remove the nut.
SST 09616-00010
10. REMOVE DUST COVER
11. REMOVE CONTROL VALVE HOUSING WITH CONTROL VALVE ASSEMBLY
a. Place matchmarks on the control valve housing and rack housing.
b. Remove the 2 bolts and control valve housing with control valve assembly.
c. Remove the gasket from the rack housing.
