Tundra Access Cab LTD 2WD V8-4.7L (2UZ-FE) (2000)
b. Using SST and a press, press out the both inner tubes and rubber parts of the bushings.
SST 09950-60010 (09951-00350) 09950-70010 (09951-07150)
c. Using a chisel and hammer, tap out the outer tubes.
d. Using SST and a press, install 2 new bushings.
SST 09710-28012 (09710-07062), 09710-30041 (09710-03211)
2. REPLACE LEAF SPRING
a. Bend to open the spring clips.
Using a chisel and hammer, pry up the 2 spring clips.
b. Remove the center bolt and nut.
Hold the spring near the spring center bolt in a vise and remove the center bolt and nut.
c. Replace the spring clip.
1. Drill off the head of the rivet and drive it out.
2. Install a new rivet into the holes of the spring leaf and clip. Then rivet with a press.