Tundra Access Cab LTD 2WD V8-4.7L (2UZ-FE) (2000)
/Page-857003.png)
7. REMOVE VALVE BODY
Remove the 17 bolts and valve body.
8. REMOVE SHIFT SOLENOID VALVE
a. Remove the 2 bolts and 3 shift solenoid valves.
b. Turn the valve body, remove the bolt, lock plate and shift solenoid valve.
c. Remove the 3 O-rings from the 3 solenoid valves.
9. REMOVE DETENT SPRING
10. REMOVE MANUAL VALVE
11. INSTALL MANUAL VALVE
12. INSTALL DETENT SPRING
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
13. INSTALL SOLENOID VALVE
a. Install 3 new O-rings to 3 shift solenoid valves.
b. Install the shift solenoid valve and lock plate with the bolt.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
c. Install the 3 shift solenoid valves with the 2 bolts.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
14. INSTALL VALVE BODY
a. Align the groove of the manual valve with the pin of the lever.
