Tundra Access Cab LTD 2WD V8-4.7L (2UZ-FE) (2000)
/Page-857004.png)
b. Install the valve body with the 17 bolts.
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
Bolt length:
Bolt A: 23 mm (0.91 inch)
Bolt B: 28 mm (1.10 inch)
Bolt C: 36 mm (1.42 inch)
15. INSTALL OIL PIPE
a. A340E: Using a plastic hammer, install the 2 pipes into position.
b. A340F: Using a plastic hammer, install the pipe into position.
NOTICE:
-
Be careful not to bend or damage the pipes.
-
Make sure that the oil pipes or magnet do not interfere with the oil pan.
16. CONNECT 4 CONNECTORS TO SHIFT SOLENOID VALVES
17. INSTALL OIL STRAINER
