Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
^
09527-17011
B.
Coat MP grease to the oil seal lip.
18.
INSTALL NEW DUST COVER AND AXLE HUB TO STEERING KNUCKLE
A.
Install the NEW dust cover to the steering knuckle with the 4 bolts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
B.
Using the following SST and a press, install the axle hub to the steering knuckle.
^
09649-17010
19.
INSTALL ABS SPEED SENSOR ROTOR (W/ABS) OR SPACER (W/O ABS)
NOTE:
Take care not to scratch the serration of the speed sensor rotor.
20.
2WD:
INSTALL NEW LOCK NUT
A.
Using the following SST, install and torque a NEW lock nut to the axle hub.
^
00002-00909 (09318-12010)
Torque: 274 N.m (2,800 kgf.cm, 203 ft.lbf)
NOTE:
Do NOT use air wrench.
B.
Using a chisel and hammer, stake the lock nut.
21.
4WD:
INSTALL BEARING SPACER