Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1335001.png)
Heater Core Case: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE HEATER RADIATOR
a. Remove the 5 screws and 3 clamps.
b. Pull out the heater radiator.
c. Remove the 2 screws and 2 clips, then disconnect the heater radiator pipes.
2. REMOVE AIR VENT DUCT
Remove the 2 screws and duct.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
