Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
Transmission Speed Sensor: Service and Repair
Vehicle Speed Sensor NO.1
1. DISCONNECT NO. 1 VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE NO. 1 VEHICLE SPEED SENSOR
Remove the bolt and No.1 vehicle speed sensor.
3. DISASSEMBLE NO. 1 VEHICLE SPEED SENSOR
a. Remove the O-ring from the speedometer driven gear assembly.
b. Remove the clip and speedometer driven gear from the speedometer driven gear sleeve.
4. ASSEMBLE NO. 1 VEHICLE SPEED SENSOR
a. Install the speedometer driven gear and clip to the speedometer driven gear sleeve.
b. Coat a new O-ring with ATF.
c. Install the O-ring to the speedometer driven gear assembly.
5. INSTALL NO. 1 VEHICLE SPEED SENSOR