Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
a. Cut off the tip of the cartridge nozzle.
Part No. 08850-00801 or equivalent
HINT: After cutting off the tip, use all adhesive within the time described in the table.
b. Load the cartridge into the sealer gun.
c. Coat the glass with adhesive as shown in the illustration.
A: 8.0 mm (0.314 in.)
B: 12.0 mm (0.472 in.)
7. Slide type:
APPLY ADHESIVE