Tundra Access Cab LTD 4WD V8-4.7L (2UZ-FE) (2001)
d. Hold the back window glass in place securely with a protective tape or equivalent until the adhesive hardens.
NOTE: Take care not to drive the vehicle during the time described in the table.
9. INSPECT FOR LEAK AND REPAIR
NOTE: Conduct a leak test after the hardening time has elapsed.
Part No. 08833-00030 or equivalent
10. INSTALL REAR PART OF ROOF HEADLINING
a. Standard cab:
Install the rear part of roof headlining with the 2 clips.
b. Access cab:
Install the rear part of roof headlining with the 3 clips.
11. INSTALL QUARTER TRIMS
12. Standard cab:
INSTALL BACK PANEL UPPER GARNISH
13. Standard cab:
INSTALL COAT HOOK
14. INSTALL ROOM LIGHT
15. Access cab:
INSTALL ROOF SIDE RAIL GARNISHES
16. Standard cab:
INSTALL FRONT PILLAR GARNISHES
17. INSTALL ASSIST GRIPS
18. Access cab:
INSTALL ACCESS DOOR SCUFF PLATES
19. Standard cab:
INSTALL FRONT DOOR SCUFF PLATES
20. Access cab:
INSTALL REAR SEAT