Tundra Access Cab SR5 2WD V8-4.7L (2UZ-FE) (2001)
Brake Pad: Service and Repair
REPLACEMENT
1. REMOVE FRONT WHEEL
2. INSPECT PAD LINING THICKNESS
Check the pad thickness and replace pads if not within specification.
Minimum thickness: 1.0 mm (0.039 inch)
3. REMOVE CLIP, 2 PINS AND ANTI-RATTLE SPRING
4. REMOVE 2 PADS AND 4 ANTI-SQUEAL SHIMS
NOTICE: The anti-rattle spring and clip can be used again provided that they have sufficient rebound, no deformation, cracks or wear, and have
had all rust, dirt and foreign particles cleaned off.
5. CHECK DISC THICKNESS AND RUNOUT