Tundra Access Cab SR5 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1539002.png)
INSPECT POWER SEAT SWITCH CIRCUIT
a. Disconnect the switch connector and connect the seat wire harness to the floor wire harness.
b. Inspect the connector on the wire harness side.
If circuit is not as specified, inspect the circuits connected to other parts.
INSPECT LUMBAR SUPPORT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
INSPECT LUMBAR SUPPORT SWITCH CIRCUIT
a. Disconnect the switch connector and connect the seat wire harness to the floor wire harness.
