Tundra Access Cab SR5 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1125002.png)
DISASSEMBLY
1. DISCONNECT CONNECTOR
(a) Remove the screw and clamp from the ABS actuator.
Torque: 2.9 Nm (30 kgf-cm, 26 inch lbs.)
(b) Disconnect the connector.
2. REMOVE ABS ECU
Using a hexagon wrench (4 mm), remove the 4 bolts and ABS ECU.
Torque: 4.4 Nm (45 kgf-cm, 39 inch lbs.)
NOTICE: Protect the actuator in order to prevent sealing surface from getting dirty and causing damage on the valve body. If the dirt and the like
is stuck to the sealing surface, use plastic tools or soft objects to remove the dirt. Do not use chemical solvents.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
