Tundra Access Cab SR5 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1317006.png)
3. REMOVE DEF. MODE SWITCH
Release the 2 claws, then remove the switch.
HINT: Tape the screwdriver tip before use.
REASSEMBLY
1. INSTALL DEF. MODE SWITCH
Install the switch.
HINT: After installation, check the fitting 2 claws.
2. INSTALL BLOWER SPEED CONTROL SWITCH
a. Install the switch with the 2 screws.
b. Connect the connector.
3. INSTALL HEATER CONTROL CABLES
Install the heater control cables to the heater control assembly.
