Tundra Access Cab SR5 4WD V8-4.7L (2UZ-FE) (2001)
3. DISCONNECT WATER HOSES FROM HEATER RADIATOR PIPES
a. Using pliers, grip the claw of clip and slide the clip along the hose.
b. Disconnect the water hoses.
HINT:
At the time of installation, please refer to the following items.
-
Push the water hose onto the heater radiator pipe as far as the second ridge on the pipe.
-
Install the hose clip in a position, as shown in the illustration.
4. REMOVE INSTRUMENT PANEL AND REINFORCEMENT.
5. REMOVE DEFROSTER NOZZLE AND HEATER TO REGISTER DUCT
Access Cab, Standard Cab Shown
6. REMOVE HEATER UNIT
Remove the 3 nuts and heater unit.
INSTALLATION
Installation is in the reverse order of removal.