Tundra Access Cab SR5 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1700001.png)
Daytime Running Lamp Relay: Testing and Inspection
Terminal Identification
Connector Disconnected:
INSPECT DAYTIME RUNNING LIGHT RELAY CIRCUIT
Disconnect the connector from the relay and inspect the connector on the wire harness side.
If circuit is as specified, perform inspections.
Connector Connected:
INSPECT DAYTIME RUNNING LIGHT RELAY CIRCUIT
Connect the wire harness side connector to the relay and inspect wire harness side connector from the back side, as shown.
If circuit is not as specified, try replacing the relay with a new one.
