Tundra Regular Cab 2WD V6-3.4L (5VZ-FE) (2000)
/Page-676002.png)
4. REMOVE THROTTLE BODY
a. Disconnect the throttle position sensor connector.
b. Disconnect the IAC valve connector.
c. Disconnect the vacuum hose.
d. Disconnect the 2 water bypass hose.
e. Disconnect the air assist hose.
f.
Remove the 2 bolts, 2 nuts, throttle body and gasket.
INSTALLATION
1. INSTALL THROTTLE BODY
a. Place a new gasket on the air intake chamber facing the protrusion upward.
