Tundra Regular Cab 2WD V6-3.4L (5VZ-FE) (2000)
b. Install the throttle body with the 2 bolts and 2 nuts.
Torque: 18 Nm (180 kg.cm, 13 ft.lb)
c. Connect the throttle position sensor connector.
d. Connect the IAC valve connector.
e. Connect the vacuum hose.
f.
Connect the 2 water bypass hoses.
g. Connect air assist hose.
2. INSTALL AIR CLEANER HOSE
3. DISCONNECT CABLES
a. W/Cruise control: Connect the cruise control actuator cable.
b. Connect the accelerator cable.
c. A/T: Connect the throttle cable.
4. FILL WITH ENGINE COOLANT