Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
A.
Disconnect shock absorber from lower suspension arm.
B.
Remove the shock absorber lower side set nut and washer.
NOTE:
Do not remove the
C.
Wrap the bolt's head with vinyl tape to prevent the drive shaft boot from being damaged.
D.
Pry down the lower suspension arm to remove the bolt and disconnect the shock absorber.
E.
Remove the 3 nuts and shock absorber with the coil spring.
NOTE:
Do not damage the
8.
Disconnect lower ball joint. Remove the 4 bolts and disconnect the lower ball joint.