Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
Drive Belt: Testing and Inspection
A/C System
1. INSPECT DRIVE BELT'S INSTALLATION CONDITION
Check that the drive belt fits properly in the ribbed grooves.
2. 5VZ-FE engine:
INSPECT DRIVE BELT TENSION
Using a belt tension gauge, check the drive belt tension.
Drive belt tension:
New belt 160 ± 25 lb
Used belt 100 ± 20 lb
HINT:
-
"New belt" refers to a belt which has been used less than 5 minutes on a running engine.
-
Used belt" refers to a belt which has been used on a running engine for 5 minutes or more.
-
After installing the drive belt, check that it fits properly in the ribbed grooves.