Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
Compressor Clutch: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE PRESSURE PLATE
a. Using SST and a socket wrench, remove the shaft bolt.
SST 07112-76060
Torque: 13.2 Nm (135 kg.cm, 9 ft.lb)
b. Install SST on the pressure palate.
SST 07112-76040
c. Using SST and socket wrench, remove the pressure plate.
SST 07112-76040, 07112-76060,