Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
Four Wheel Drive Selector Switch: Testing and Inspection
INSPECTION
1. INSPECT 2WD <--> 4HI SHIFT
a. Ignition switch ON.
b. Check that the 4HI indicator lights come on when the touch select 2-4 switch is in ON position.
c. Check that the 4HI indicator lights go off when the touch select 2-4 switch is in OFF position.
HINT:
-
If the light does not light up, even though the switch has been turned ON, the vehicle should be moved back and forth.
-
If switching is not completed after 3 seconds of shift operation, the 4HI indicator light will flash.
2. INSPECT 4HI <--> 4LO SHIFT