Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
/Page-1324002.png)
REMOVE FRONT AIRBAG SENSOR
a. 2UZ-FE:
Remove the battery carrier, battery and battery tray.
b. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed.
c. Remove the 2 bolts and front airbag sensor.
2. RH:
REMOVE FRONT AIRBAG SENSOR
a. Remove the air cleaner assembly.
b. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed.
c. Remove the 2 bolts and front airbag sensor.
INSTALLATION
INSTALL FRONT AIRBAG SENSORS
