Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
/Page-1118002.png)
5. INSPECT COMMUTATOR DIAMETER
Using vernier calipers, measure the commutator diameter.
Standard diameter:
Minimum diameter:
If the diameter is less than minimum, replace the armature.
6. INSPECT UNDERCUT DEPTH
Check that the undercut depth is clean and free of foreign materials. Smooth out the edge.
Standard undercut depth:
Minimum undercut depth: 0.2 mm (0.008 in.)
If the undercut depth is less than minimum, correct it with a hacksaw blade.
7. INSPECT FIELD COIL FOR OPEN CIRCUIT
