Tundra Regular Cab SR5 4WD V8-4.7L (2UZ-FE) (2000)
/Page-871005.png)
a. Install 3 new gaskets.
b. Install the oil strainer with the 4 bolts.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
Bolt length:
Bolt A: 14 mm (0.55 inch)
Bolt B: 20 mm (0.79 inch)
Bolt C: 23 mm (0.91 inch)
18. INSTALL OIL PAN
HINT: Remove any packing material and be careful not to drop oil on the contacting surfaces of the transmission case and oil pan.
a. Install the 4 magnets in the indications of the oil pan.
b. Apply FIPG to the oil pan, as shown in the illustration.
FIPG: Part No. 08826-00090, THREE BOND 1281 or equivalent
c. Install the 19 bolts and oil pan.
Torque: 7.4 Nm (75 kgf-cm, 65 inch lbs.)
19. FILL AND CHECK ATF
a. Install a new gasket and the drain plug.
Torque: 20 Nm (205 kgf-cm, 15 ft. lbs.)
b. Fill new fluid through the filler pipe.
