Van Wagon 2WD L4-2237cc 2.2L (4Y-E) (1989)
Fig. 4 Master Cylinder Lubrication Locations. Typical
Clean parts with compressed air. Inspect cylinder bore for rust and scoring. Also, inspect for wear or damage to bore. If necessary, replace. Refer to Fig.
4 for master cylinder lubricant locations.
ASSEMBLY
1.
Install two grommets.
2.
Install reservoir, while pushing down on reservoir, install setscrew. Torque setscrew to 15.2 in.lbs.
3.
Install master cylinder boot, then the master cylinder as previously described.