Van Wagon 2WD L4-2237cc 2.2L (4Y-E) (1989)
/Page-606001.png)
Pick-Up Coil: Testing and Inspection
***UPDATED BY TSB# EN91-007, JUNE 1991
Pickup Coil Testing
1.
Disconnect the wiring connector near the distributor.
2.
Measure resistance between the pick-up coil terminals.
Pickup Coil Resistance:
130 - 210 ohms
Pickup Coil Air Gap
4.
Using a non-magnetic feeler gauge, measure the gap between the signal rotor and pickup coil projection.
Air Gap:
0.008 in (0.2 mm) Or More
NOTE: The air gap is not adjustable. If any of the above tests reveal a pick-up coil outside specifications, replace the pick-up coil assembly.
