Van Wagon 2WD L4-2237cc 2.2L (4Y-EC) (1987)
/Page-639002.png)
1.
Remove nuts and rubber cushions from ends of bolt between lower control arms and stabilizer bar ends. Disconnect stabilizer bar, Fig. 15.
2.
Remove stabilizer bar brackets, bushings, and stabilizer bar.
3.
Reverse procedure to install. Torque bracket bolts to 14 ft. lbs. (19 Nm). Tighten nuts on stabilizer end bolts so .51-.63 inch (13-16 mm) of bolt
end is exposed.