Venza AWD L4-2.7L (1AR-FE) (2009)
Antenna, Navigation: Service and Repair
Installation
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA: INSTALLATION
INSTALLATION
1. INSTALL NAVIGATION ANTENNA ASSEMBLY
(a) Install the navigation antenna assembly with the 2 screws.
(b) Engage the 4 clamps.
2. INSTALL HEATER TO REGISTER DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Reassembly
3. INSTALL DEFROSTER NOZZLE ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Reassembly
4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Reassembly
5. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Reassembly
6. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
HINT: Refer to the procedure from Install Roof Headlining Assembly See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation.