Venza AWD L4-2.7L (1AR-FE) (2009)
Side) See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and Repair/Front Passenger Side
Power Window Switch/Removal
5. REMOVE COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Removal
6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
7. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
8. REMOVE DOOR SIDE AIRBAG SENSOR See: Restraint Systems/Air Bag Systems/Impact Sensor/Service and Repair/Side Airbag Sensor (for
Front Side)/Removal
9. REMOVE FRONT DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
11. REMOVE FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side) See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly
12. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Service and Repair/Disassembly
13. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY
(a) Disengage the 2 claws.
(b) Disconnect the connector.
(c) Move the lever in the direction indicated by the arrow in the illustration.
(d) Remove the front door outside handle assembly as shown in the illustration.
Installation
THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH: INSTALLATION
INSTALLATION
1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY