Venza AWD L4-2.7L (1AR-FE) (2009)
/Page-2087002.png)
(a) Disconnect the connector.
(b) Disengage the clamp and remove the electrical key oscillator.
NOTICE: Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
Installation
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Front Floor): INSTALLATION
INSTALLATION
1. INSTALL ELECTRICAL KEY OSCILLATOR
(a) Engage the clamp and install the electrical key oscillator.
NOTICE: Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
(b) Connect the connector.
2. INSTALL CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
3. INSTALL NO. 2 CONSOLE BOX CARPET See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
