Venza AWD L4-2.7L (1AR-FE) (2009)
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the name plate (if reusing the name plate).
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
(c) Install the hood emblem.
(1) Using a heat light, heat the vehicle body and the hood emblem.
(2) Remove the release paper from the hood emblem.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the hood emblem as shown in the illustration.
Text in Illustration