Venza AWD L4-2.7L (1AR-FE) (2009)
Systems/Television / Monitor/Service and Repair/Removal
59. REMOVE TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System) See: Accessories and Optional Equipment/Entertainment
Systems/Television / Monitor/Service and Repair/Removal
60. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/o Sliding Roof)
(a) Using a clip remover, disengage the 4 claws.
Text in Illustration
NOTICE: Do not forcibly pry the assist grip covers to prevent them from being deformed.
-
Gently pry on the assist grip covers as shown in the illustration to remove them.
-
Tape the clip remover tip before use.
(b) Pull off the 2 assist grip covers by hand.
(c) Disengage the 2 clips and remove the front assist grip sub-assembly.
(d) Remove the 2 clips from the vehicle body.
HINT: Use the same procedure for the RH side and the LH side.
61. REMOVE REAR ASSIST GRIP ASSEMBLY (w/o Sliding Roof)