Venza AWD L4-2.7L (1AR-FE) (2009)
Trunk / Liftgate Lock: Testing and Inspection
DOOR LOCK: BACK DOOR LOCK: INSPECTION
INSPECTION
1. INSPECT BACK DOOR LOCK ASSEMBLY (w/o Back Door Closer System)
(a) Check the operation of the door lock motor.
(1) Move the door lock to the lock position.
(2) Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
OK:
If the result is not specified, replace the back door lock.
(b) Check the operation of the door courtesy switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not specified, replace the back door lock assembly.
2. INSPECT BACK DOOR LOCK ASSEMBLY (w/ Back Door Closer System)
(a) Check the operation of the door lock motor.