Venza AWD L4-2.7L (1AR-FE) (2009)
(b) Cut off the 12 tack pins that fasten the seat heater, and then remove the separate type front seatback heater from the front separate type
seatback cover.
Installation
SEAT: FRONT SEATBACK HEATER: INSTALLATION
INSTALLATION
1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER
(a) Using a tacker, install the separate type front seatback heater to the end of the separate type front seatback cover with 12 new tack pins.
NOTICE: Be careful not to damage the cushion.