Toyota Workshop Service and Repair Manuals

Water Pump: Service and Repair
Removal

1AR-FE COOLING: WATER PUMP: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:  When disconnecting the cable, some systems need to be initialized after the cable is reconnected  See: Testing and
Inspection/Repair Instruction - Initialization.

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
3. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
4. REMOVE NO. 1 ENGINE UNDER COVER
5. REMOVE NO. 2 ENGINE UNDER COVER
6. DRAIN ENGINE COOLANT See: Coolant/Service and Repair
7. REMOVE V-RIBBED BELT

HINT:  See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal

8. REMOVE WIRE HARNESS CLAMP BRACKET See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal
9. REMOVE GENERATOR ASSEMBLY See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal

10. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY See: Engine/Service and Repair/Overhaul/Disassembly
11. REMOVE WATER PUMP ASSEMBLY

(a) Remove the 7 bolts, water pump and water pump gasket.