Venza AWD L4-2.7L (1AR-FE) (2009)
(2) After connecting, check that the pipe and connector are securely connected by pulling on them.
(3) Inspect for fuel leaks See: Powertrain Management/Fuel Delivery and Air Induction/Testing and Inspection.
(h) Observe the following precautions when handling a nylon tube:
CAUTION:
-
Do not twist the connection part of the nylon tube or the quick connector when connecting them.
-
Do not bend or twist the nylon tube.
-
Do not remove the EPDM protector on the outside of the nylon tube.
-
Do not pinch or kink the nylon tubes to prevent fuel leakage.
4. FUEL INJECTOR
(a) Install the injector to the delivery pipe and the lower intake manifold as shown in the illustration.
Text in Illustration
NOTICE: Before installing the injector, be sure to apply a light coat of gasoline or spindle oil where the delivery pipe contacts the injector
O-ring.
(b) Observe the following precautions when removing and installing a fuel injector:
(1) Never reuse an O-ring.
(2) When placing a new O-ring onto an injector, do not damage the O-ring.
(3) Coat a new O-ring with spindle oil or gasoline before installing it.
NOTICE: Do not use engine oil, gear oil or brake fluid.