Venza AWD L4-2.7L (1AR-FE) (2009)
(g) Install the wire harness bracket with the bolt.
Torque: 8.4 Nm (86 kgf-cm, 74in-lbf)
(h) Connect the fuel vapor feed hose, clamp and connector.
(i) Install the 2 wire harness brackets with the 2 bolts.
Torque: 8.4 Nm (86 kgf-cm, 74in-lbf)
5. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and
Repair/Installation
6. INSTALL UNION TO CONNECTOR TUBE HOSE
(a) Install the union to connector tube hose to the intake manifold.
7. CONNECT NO. 2 VENTILATION HOSE
(a) Connect the No. 2 ventilation hose to the intake manifold.
8. INSTALL VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)