Venza AWD L4-2.7L (1AR-FE) (2009)
Timing Cover: Specifications
TIMING CHAIN COVER SUB-ASSEMBLY
Temporarily install the timing chain cover with the 17 bolts and 2 nuts.
Bolt Length:
Make sure there is no oil on the bolts. If there is oil on the bolts, clean them before installing them.
Tighten the 17 bolts and 2 nuts in several steps, in the sequence shown in the illustration.
For bolt 1, 2, 3 and 4 - Torque...................................................................................................................................................55 Nm (561 kgf-cm, 41ft-lbf)
Except bolt 1, 2, 3 and 4 - Torque..............................................................................................................................................21 Nm (214 kgf-cm, 15ft-lbf)