Venza AWD L4-2.7L (1AR-FE) (2009)
(a) Remove the clip and No. 1 console box duct as shown in the illustration.
99. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY
(a) Disengage the clamp.
(b) Disengage the 4 claws and remove the No. 6 heater to register duct assembly.
100. REMOVE NO. 3 INSTRUMENT PANEL REINFORCEMENT
(a) Disengage the clamp.
(b) Remove the bolt and disconnect the earth wire.
(c) Remove the 2 nuts and No. 3 instrument panel reinforcement.
Text in Illustration
101. REMOVE NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY
(a) Disengage each clamp.