Venza AWD L4-2.7L (1AR-FE) (2009)
Refrigerant Pressure Sensor / Switch: Service and Repair
Installation
HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL AIR CONDITIONING PRESSURE SENSOR
(a) Sufficiently apply compressor oil to a new air conditioning pressure sensor.
Compressor oil:
ND-OIL 8 or equivalent
(b) Install the air conditioning pressure sensor.
Torque: 11 Nm (112 kgf-cm, 8ft-lbf)
(c) Connect the connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Repair Instruction - Initialization.
3. CHARGE WITH REFRIGERANT See: Service and Repair
4. WARM UP ENGINE See: Service and Repair
5. INSPECT FOR REFRIGERANT LEAK See: Service and Repair