Venza AWD L4-2.7L (1AR-FE) (2009)
Nut - Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)
Bolt - Torque: 15 Nm (153 kgf-cm, 11ft-lbf)
(d) Connect the heated oxygen sensor connector and engage the 2 clamps (for 2GR-FE).
(e) Return the floor carpet assembly to an original state.
3. INSTALL CONSOLE BOX SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Installation
4. INSTALL POSITION INDICATOR HOUSING ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Installation
5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Installation
6. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Installation
7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and
Repair/Installation
8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH See: Dashboard / Instrument Panel/Service and Repair/Installation
9. INSTALL FRONT DOOR SCUFF PLATE RH See: Dashboard / Instrument Panel/Service and Repair/Installation
10. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL See: Dashboard / Instrument Panel/Service and Repair/Installation
11. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
12. INSTALL FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
13. INSTALL AIR CONDITIONING CONTROL ASSEMBLY See: Heating and Air Conditioning/Control Assembly/Service and Repair/Installation
14. INSTALL CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
15. INSTALL NO. 2 CONSOLE BOX CARPET See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
16. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) See: Dashboard / Instrument Panel/Service and
Repair/Installation
17. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) See: Dashboard / Instrument Panel/Service and
Repair/Installation
18. INSTALL FRONT SEAT ASSEMBLY LH
HINT: Refer to the instructions for Installation of the front seat assembly.
-
for Manual Seat: See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Manual Seat)/Installation
-
for Power Seat: See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Power Seat)/Installation
19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Repair Instruction - Initialization.
20. INSPECT BRAKE WARNING LIGHT See: Brakes and Traction Control/Parking Brake System/Adjustments